tag:blogger.com,1999:blog-347418456955034307.post4692398739700294773..comments2022-04-24T19:41:55.066+10:00Comments on Semi-automatic: Roland MC-50 midi sequenceradambabyhttp://www.blogger.com/profile/12040423080705963277noreply@blogger.comBlogger21125tag:blogger.com,1999:blog-347418456955034307.post-36430244209295549192018-10-23T23:18:16.384+10:002018-10-23T23:18:16.384+10:00well the good news is on further inspection I real...well the good news is on further inspection I realized that for the data copy i did, it did indeed start it much later, so i redid it and made sure it was starting at beginning, (the data was a little hard to understand till i realized which part was measure #) and now my copied data is playing on track 1 from the beginning. Now I think it comes down to the performance settings on the JV and I'm digging into that manual to see how to set it there so I can play the diff sounds on the diff tracks. I feel like I have the mC50 settings right for that now. I reset all the performances on the JV in case the previous owner had certain settings that were still on there that might be causing a problem. Hopefully I can get that part figured out tonight! Almost there... one step closer! The patch bay actually solved a lot of the cabling issues and I just have it on pass through mode, "live keys" which is basically just the ins and outs. no special settings.Anonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-15745863465462195532018-10-23T08:29:07.785+10:002018-10-23T08:29:07.785+10:00Oh, and always, when troubleshooting midi between ...Oh, and always, when troubleshooting midi between two devices, you should temporarily bypass any patchbay. Just direct connections, less variables that way! adambabyhttps://www.blogger.com/profile/12040423080705963277noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-56288271304738407272018-10-23T08:27:47.544+10:002018-10-23T08:27:47.544+10:00This comment has been removed by the author.adambabyhttps://www.blogger.com/profile/12040423080705963277noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-4932731756574965502018-10-23T07:40:46.165+10:002018-10-23T07:40:46.165+10:00Data not casts ... Data not casts ... Anonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-4057184506022683792018-10-23T07:40:21.507+10:002018-10-23T07:40:21.507+10:00No there is no sound when I turn off the rhythm tr...No there is no sound when I turn off the rhythm track even though I see all th casts there for all measures .. going to twiddle some knobs and see if I can figure out why Anonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-31189031284746729742018-10-23T07:21:40.276+10:002018-10-23T07:21:40.276+10:00Sorry I don't have a JV1010 to test. But have ...Sorry I don't have a JV1010 to test. But have we established where the problem is? If you copy the data over to the new track, before changing the midi channel, does it play the drum notes? If it does, and then doesn't play when you change midi channels, then, yes, it sounds like you need to troubleshoot the midi set up on the JV, e.g. make sure there is full midi volume (CC#7) and that the right PG and bank messages are sent to get the sound you want.adambabyhttps://www.blogger.com/profile/12040423080705963277noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-79044458524233991032018-10-23T03:24:39.546+10:002018-10-23T03:24:39.546+10:00at this point i think i might just get a drum modu...at this point i think i might just get a drum module to handle the drums, and use the other patches on the JV but if you have any ideas on the solution lmk. seems like the jv is the most stripped down model so programming is more complicated but all the sounds i get is worth havingAnonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-13764145382360830052018-10-23T03:06:35.838+10:002018-10-23T03:06:35.838+10:00https://www.sweetwater.com/sweetcare/articles/rola...https://www.sweetwater.com/sweetcare/articles/roland-jv-1010-performance-selecting/ found thisAnonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-91401803967416327682018-10-23T00:06:04.546+10:002018-10-23T00:06:04.546+10:00do i need to send a program change like bank/patch...do i need to send a program change like bank/patch? i don't know how to do that but willing to try!Anonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-8841418719364757452018-10-22T23:20:36.808+10:002018-10-22T23:20:36.808+10:00maybe its in my midi setup. what is 'soft thru...maybe its in my midi setup. what is 'soft thru' does that have anything to do with the thru port or only in a DAW. Do I need a midi cable from the JV out back into an in on my patchbay? I only have the out from the patch bay to the JV in. I might be using the thru to send the sync to my drum machine I'll have to look. Only thing I can think of is the midi signal needs to come back from the JVAnonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-39009083222557755202018-10-22T23:17:47.897+10:002018-10-22T23:17:47.897+10:00yeah i mean i hadn't done edit 8 yet but just ...yeah i mean i hadn't done edit 8 yet but just did - assigned track 1 to midi channel 2 and the jv1010 is in 'performance' mode. im reading up on some of the jv stuff right now but either way, when i inspect the data on track 1 after the copy with the microscope i see all the data but when i turn off rhythm track i still hear nothing on track 1 even though data is there. it shouldn't need to be this complicated to do such a simple task. i love roland gear but their manuals are the worse. they tell you how to do certain processes but not why and no troubleshooting and no sample workflows. written for a midi expert by a midi expert. if not for you and others online i'd have gone back to my DAW long ago. Not sure what to do next. Anonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-61729224582457914592018-10-22T10:47:50.316+10:002018-10-22T10:47:50.316+10:00So, after copying, the data in track 1 is still on...So, after copying, the data in track 1 is still on midi channel 10, you haven't converted it yet? (EDIT #8) and you mute the Rhythm track and still no drums play from track 1? <br />Bizarre. No other modules connected? The JV is set up in multi mode?adambabyhttps://www.blogger.com/profile/12040423080705963277noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-52093708646757261792018-10-22T10:40:10.252+10:002018-10-22T10:40:10.252+10:00Re did the copy and the data is there on track 1 f...Re did the copy and the data is there on track 1 from measure 1. Function 11 says Trk 1+2 and Function 12 has no special different assignments . Want the rhythm track to keep using channel 10 on the JV which I think is standard for midi and then using a bass on channel 1 from same jv1010 module . I checked the function 12 and it seems like track 1 is assigned to track 1 not sure what I’m doing wrong Anonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-14110895589606336692018-10-21T13:06:40.919+10:002018-10-21T13:06:40.919+10:00No problem. In the first 10 years I owned this mac...No problem. In the first 10 years I owned this machine, I would once a year just go through the manual again, because I always found something I didn't know!!adambabyhttps://www.blogger.com/profile/12040423080705963277noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-44015428229324867112018-10-20T23:05:53.796+10:002018-10-20T23:05:53.796+10:00Thanks will try again when I’m home tomorrow. I fo...Thanks will try again when I’m home tomorrow. I followed the manual instructions so I figured it would just copy it the same way . That manual is god awful ! I’ve kearned more from just trying things myself ! Might hit you up with more questions if that’s ok Anonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-25110299102713651332018-10-20T09:06:31.108+10:002018-10-20T09:06:31.108+10:00In the copy procedure, you have to make sure your ...In the copy procedure, you have to make sure your destination bar is at the start of the song, because it defaults to the end. In other words, the rhythm track you just copied to track one may now start at the bar number where the original track finished!<br />Have you checked the contents of Track 1 in microscope mode? Make sure the expected data is there and on the expected midi channel, starting at Bar 1. <br />If that all looks OK, then go into Function 11 and make sure all midi tracks are transmitting to both physical midi outputs. Then check Function 12 (which should be fine unless you have deliberately changed something) which shows if midi channel numbers are being converted to a different number. adambabyhttps://www.blogger.com/profile/12040423080705963277noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-26695760065960976122018-10-19T08:55:42.451+10:002018-10-19T08:55:42.451+10:00Hi I’m trying to copy my recorded rhythm track int...Hi I’m trying to copy my recorded rhythm track into a phrase track ie track 1 so I can use the same midi data but use a bass sound instead on the new track so the drums and bass are playing same thing. I did the copy procedure and now track 1 lights up but when I turn off the rhythm track I hear no sound on track 1 . If I did get this to work I was going to then transmit track 1 to a different midi channel where that bass sound lives on the same module . Have not had any luck finding out how on anything on google as this thing is ancient now so any help would be appreciated . Thanks in advance . Anonymoushttps://www.blogger.com/profile/02232948831015470043noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-9031305618448541302017-05-11T18:02:52.405+10:002017-05-11T18:02:52.405+10:00Actually, the adambaby.com website is back up and ...Actually, the adambaby.com website is back up and running, so you can access the original article againadambabyhttps://www.blogger.com/profile/12040423080705963277noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-58298993150649650012017-05-09T12:58:11.467+10:002017-05-09T12:58:11.467+10:00Yes hoping to do this in the coming weeks, cheers,...Yes hoping to do this in the coming weeks, cheers, Adamadambabyhttps://www.blogger.com/profile/12040423080705963277noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-78510630618720491692017-04-27T02:01:02.835+10:002017-04-27T02:01:02.835+10:00Hi there, any chance you will be adding your Casio...Hi there, any chance you will be adding your Casio CZ 101 renovation post to this blog? I bought a non-working CZ 101 recently and I was using your excellent blog entry as a tutorial for teardown and rebuild. Your pics and info were very helpful! I understand if you prefer not to, maybe it is archived somewhere? I looked but had no luck.clsnackyhttps://www.blogger.com/profile/14870429047206299798noreply@blogger.comtag:blogger.com,1999:blog-347418456955034307.post-53179443476529586492015-02-28T22:01:18.902+10:002015-02-28T22:01:18.902+10:00Great article! I've read this on your website ...Great article! I've read this on your website earlier on, and I am very interested to replace the diskdrive as well.. Thanks for the documentattion..Martynoreply@blogger.com